Share

Exposure to the extreme heat of an arc flash can result in life-threatening burns. Most fatalities occur because the clothing continues to burn after the arc exposure.

With temperatures reaching 35,000°F, exposure to the extreme heat of an arc flash can result in life-threatening burns. Most fatalities occur because the clothing continues to burn after the arc exposure.

Flame-resistant clothing will self‐extinguish, thus limiting the injury. ARC-rated performance values are assigned to clothing under NFPA 70E, ensuring you know what you’re purchasing. When you’re up against arc flashes and blast hazards, you don’t want to take any chances with unproven PPE. Before we go any further, there are several definitions that need to be explained.

  • Arc Flash – an electric discharge that travels through the air between conductors or from a conductor to a ground. The resulting explosion can cause fires and serious harm to equipment and people.
  • ATPV – arc thermal performance value tells a wearer the point at which 1.2 Cal/cm2 of incident energy is transferred through the fabric. A garment’s fabric is tested for arc, not the actual garment.
  • ARC Rating – ARC ratings are described by ASTM 1506 as follows: An ARC rating is a value that indicates the ARC performance of a material or system of materials. It is either the ARC thermal performance value (APTV) or breakopen threshold energy (EBT) when the ATPV cannot be determined by Test Method F 1959. A garment’s ARC rating can be found on the interior tag below the collar.
  • Calorie – a measure of the energy released from an electrical explosion. 1 Cal/cm2 of incident energy will raise 1 gram of water 1 degree Celsius.

NFPA 70E stresses an Arc-Rated Category (ARC) level of arc flash protective clothing that must be worn to guard against a minimum level of energy (calories) released from an electrical explosion. Below is a table identifying the four ARC Flash PPE Levels:

The ARC ratings include five risk levels, which range from 0 to 4. Level 0 means there is no risk of melting materials (N/A), whereas Level 4 is an extreme risk. A Hazard Risk Category Level (HRC) level, now referenced as PPE Level, is determined by the minimum amount of calories per square centimeter (ATPV or Cal/cm2).

It is imperative that an arc flash hazard analysis be performed by safety personnel before selecting PPE styles. This can be accomplished in one of two ways:

  1. Determine the energy exposure to a worker in calories.
  2. Use the Job Task Table 130.7 (C) (9). The link provided shows a simplified method for using NFPA 70E tables.

For additional information on 70E, explore more here.

Previously Featured on MCR Safety's Knowledge Center.

Talk to Us!

Leave a reply

Your email address will not be published. Required fields are marked *

MCR Safety has over forty years of experience as a leader in the field of personal protective equipment (PPE). Our assortment of offerings includes gloves, glasses, and garments which are made from the highest quality materials available to ensure maximum safety, comfort, and style.

Browse Products from MCR Safety

More on Personal Protective Equipment

Women historically have had limited access to PPE designed to fit their body type with the same level of performance as standard PPE offerings.  

Here’s what you need to know about gauge with your knit safety gloves.

These days, more and more companies are realizing the value in customizing their personal protective equipment.

MSC

Signing into Better MRO is easy. Use your MSCdirect.com username / password, or register to create an account. We’ll bring you back here as soon as you’re done.

Redirecting you in 5 seconds